How to Install Windows 7 (Beginners)

Are you installing Windows 7? You don't need to be a professional or refer to a confusing manual in order to do so. Just follow this guide, and you'll have Windows 7 installed on that computer in no time!

Installing Using a Disc

Clean Install

A clean install is intended for users who want to freshly install Windows on their computer (by deleting all of the data on the hard disk and then installing Windows) or computers that do not have an operating system yet.

Image titled Install Windows 7 (Beginners) Step 1 

1
Enter your computer's BIOS. Turn off the computer that you want to install Windows on then turn it back on. When the BIOS screen appears or you are prompted to do so, press Del, Esc, F2, F10, or F9 (depending on your computer’s motherboard) to enter the system BIOS. The key to enter the BIOS is usually shown on the screen.

Image titled Install Windows 7 (Beginners) Step 2
2
Find your BIOS's boot options menu. The boot options menu of your BIOS may vary in location or name from the illustration, but you may eventually find it if you search around.
If you can't find the boot options menu, search the name of your BIOS (most likely located in the BIOS menu) online for help.
Image titled Install Windows 7 (Beginners) Step 3 
3
Select the CD-ROM drive as the first boot device of your computer.
Although this method may vary among computers, the boot options menu is typically a menu of movable device names where you should set your CD-ROM drive as the first boot device. It can also be a list of devices that you can set the order of their boot on. Consult a manual or the internet for help if you're stuck.
Image titled Install Windows 7 (Beginners) Step 4 
4
Save the changes of the settings. Press the button indicated on the screen or select the save option from the BIOS menu to save your configuration.
Image titled Install Windows 7 (Beginners) Step 5
5
Shut off your computer. Either turn off the computer by choosing the shut-down option in your current operating system, or hold the power button until the computer powers off. 
Image titled Install Windows 7 (Beginners) Step 6
  1. 6
    Power on the PC and the insert the Windows 7 disc into your CD/DVD drive.
  2. Image titled Install Windows 7 (Beginners) Step 7
    7
    Start your computer from the disc. After you have placed the disc into the disc drive, start your computer. When the computer starts, press a key if you are asked if you would like to boot from the disc by pressing any key. After you choose to start from the disc, Windows Setup will begin loading.
    • If you are not asked to boot from the disc, you may have done something wrong. Retry the previous steps to solve the problem.
  3. Image titled Install Windows 7 (Beginners) Step 8
    8
    Choose your Windows Setup options. Once Windows Setup loads, you'll be presented with a window. Select your preferred language, keyboard type, and time/currency format, then click Next.
  4. Image titled Install Windows 7 (Beginners) Step 9
    9
    Click the Install Now button.
  5. Image titled Install Windows 7 (Beginners) Step 10
    10
    Accept the License Terms. Read over the Microsoft Software License Terms, check I accept the license terms, and click Next.
  6. Image titled Install Windows 7 (Beginners) Step 11
    11
    Select the Custom installation.
  7. Image titled Install Windows 7 (Beginners) Step 12
    12
    Decide on which hard drive and partition you want to install Windows on. A hard drive is a physical part of your computer that stores data, and partitions "divide" hard drives into separate parts.
    • If the hard drive has data on it, delete the data off of it, or format it.
      • Select the hard drive from the list of hard drives.
      • Click Drive options (advanced).
      • Click Format from Drive options.
    • If your computer doesn't have any partitions yet, create one to install Windows on it.
      • Select the hard drive from the list of hard drives.
      • Click Drive options (advanced).
      • Select New from Drive options.
      • Select the size, and click OK.
  8. Image titled Install Windows 7 (Beginners) Step 13
    13
    Install Windows on your preferred hard drive and partition. Once you've decided on where to install Windows, select it and click Next. Windows will begin installing. 

    Upgrade

    An Upgrade installation upgrades an older version of Windows on your computer (E.G. Windows Vista to Windows 7.)

    Image titled Install Windows 7 (Beginners) Step 14

    1. 1
      Start your computer normally into your current operating system.
    2. Image titled Install Windows 7 (Beginners) Step 15
      2
      Check to see if your computer is compatible with Windows 7. The Windows 7 Upgrade Advisor scans your computer to see if you can upgrade it to Windows 7. Download it here.
    3. Image titled Install Windows 7 (Beginners) Step 16
      3
      Prepare your computer to install Windows.
      • Scan your computer for malware. Malware can prevent Windows from installing correctly.
      • Disable or uninstall any antivirus software because they may interfere with the Windows installation.
      • Uninstall some unnecessary programs to speed up the upgrade. You can install them after Windows 7 has finished.
      • Update Windows with Windows Update.
      • Delete some unnecessary files to speed up the upgrade.
      • Back up your hard drive in case the installation fails and you lose your files. (optional).
    4. Image titled Install Windows 7 (Beginners) Step 17
      4
      Insert your Windows 7 installation disc into the computer at this point.
    5. Image titled Install Windows 7 (Beginners) Step 18
      5
      Start Windows Setup. After the disc has loaded, click Start →Computer, double click the disc drive that Windows 7 Setup was placed in, and double-click setup.exe on the disc. Allow Setup to start.
    6. Image titled Install Windows 7 (Beginners) Step 19
      6
      Click Install Now.
    7. Image titled Install Windows 7 (Beginners) Step 20
      7
      Decide whether to install updates for Windows Setup. The updates are intended to fix known problems with Windows Setup and installing updates makes your installation smoother and more stable. To get updates, click Go Online to get the latest updates for installation (recommended). To skip updates, click Do not get the latest updates for installation.
    8. Image titled Install Windows 7 (Beginners) Step 21
      8
      Accept the License Terms. Read over the Microsoft Software License Terms, check I accept the license terms, and click Next.
    9. Image titled Install Windows 7 (Beginners) Step 22
      9
      Select the Upgrade installation.

      Part 2
      Installing Using a Flash Drive or External Drive

      Installing Windows Setup to the Flash Drive or External Drive

      You will need to extract the Windows Setup files to a drive before continuing any farther.
      1. Image titled Install Windows 7 (Beginners) Step 23
        1
        Plug a drive with a minimum of 4 gigabytes of memory into a computer.
      2. Image titled Install Windows 7 (Beginners) Step 24
        2
        Move any personal files off of the drive.
      3. Image titled Install Windows 7 (Beginners) Step 25
        3
        Download the Windows 7 Setup ISO. An ISO file is a disc image. Note: This download may take a while, depending on your internet speed.
        • A list of download links is available here.
        • If the link to the website does not work, click here to download a list of the links.
      4. Image titled Install Windows 7 (Beginners) Step 26
        4
        Download and install the Windows 7 USB/DVD Download Tool from this link.
      5. Image titled Install Windows 7 (Beginners) Step 27
        5
        Once the ISO has finished downloading, open the Windows 7 USB/DVD Download Tool.
      6. Image titled Install Windows 7 (Beginners) Step 28
        6
        Select the ISO. On the Step 1 of 4: Choose ISO file screen of the Windows 7 USB/DVD Download Tool, select the downloaded ISO file by clicking Browse, then click Next to continue.
      7. Image titled Install Windows 7 (Beginners) Step 29
        7
        On the Step 2 of 4: Choose media type screen, choose USB device.
      8. Image titled Install Windows 7 (Beginners) Step 30
        8
        On the Step 3 of 4: Insert USB device screen, choose the drive you want to extract the Setup files to, then click Begin copying.
        • If you receive an error that says Not Enough Free Space, click the Erase USB Device button, which will erase all of the files on the drive.
      9. Image titled Install Windows 7 (Beginners) Step 31
        9
        Once Windows 7 USB/DVD Download Tool has finished extracting the ISO to the flash drive, your drive is ready to install Windows.
        • You may delete the ISO file now, as it is no longer required.

      Clean Installation

      A clean install is intended for users who want to freshly install Windows on their computer (by deleting all of the data on the hard disk and then installing Windows) or computers that do not have an operating system yet. (Note: Older computers may not be able to perform a clean installation with the drive.)
      1. Image titled Install Windows 7 (Beginners) Step 32
        1
        Make sure the drive that Windows 7 Setup was extracted onto is plugged into the computer.
      2. Image titled Install Windows 7 (Beginners) Step 33
        2
        Enter your computer's BIOS. Turn off the computer that you want to install Windows on then turn it back on. When the BIOS screen appears or you are prompted to do so, press Del, Esc, F2, F10, or F9 (depending on your computer’s motherboard) to enter the system BIOS. The key to enter the BIOS is usually shown on the screen.
      3. Image titled Install Windows 7 (Beginners) Step 34
        3
        Find your BIOS's boot options menu. The boot options menu of your BIOS may vary in location or name from the illustration, but you may eventually find it if you search around.
        • If you can't find the boot options menu, search the name of your BIOS (most likely located in the BIOS menu) online for help.
      4. Image titled Install Windows 7 (Beginners) Step 35
        4
        Select the drive as the first boot device of your computer.
        • If your drive doesn't show up as a boot device, then your computer doesn't support it.
        • Although this method may vary among computers, the boot options menu is typically a menu of movable device names where you should set your drive as the first boot device. It can also be a list of devices that you can set the order of their boot on individually. Consult a manual or the internet for help if you're stuck.
      5. Image titled Install Windows 7 (Beginners) Step 36
        5
        Save the changes of the settings. Press the button indicated on the screen or select the save option from the BIOS menu to save your configuration.
      6. Image titled Install Windows 7 (Beginners) Step 37
        6
        Shut off your computer. Either turn off the computer by choosing the shut-down option in your current operating system, or hold the power button until the computer powers off.
      7. Image titled Install Windows 7 (Beginners) Step 38
        7
        Turn your computer back on. Your computer should enter Windows Setup.
        • If your computer asks you if you want to boot from a CD by pressing any key, boot from it. Windows Setup will load.
        • Important Information: If you receive a CD/DVD device driver missing error during Setup at any point, simply click Cancel on the error message which will return you to the Welcome screen. Once you reach the Welcome screen, un-plug the USB drive and plug in into another USB port on your computer, then continue with the installation.
      8. Image titled Install Windows 7 (Beginners) Step 39
        8
        Choose your Windows Setup options. Once Windows Setup loads, you'll be presented with a window. Select your preferred language, keyboard type, and time/currency format, then click Next.
      9. Image titled Install Windows 7 (Beginners) Step 40
        9
        Click the Install Now button.
      10. Image titled Install Windows 7 (Beginners) Step 49
        10
        Accept the License Terms. Read over the Microsoft Software License Terms, check I accept the license terms, and click Next.
      11. Image titled Install Windows 7 (Beginners) Step 11
        11
        Select the Custom installation.
      12. Image titled Install Windows 7 (Beginners) Step 12
        12
        Decide on which hard drive and partition you want to install Windows on. A hard drive is a physical part of your computer that stores data, and partitions "divide" hard drives into separate parts.
        • If the hard drive has data on it, delete the data off of it, or format it.
          • Select the hard drive from the list of hard drives.
          • Click Drive options (advanced).
          • Click Format from Drive options.
        • If your computer doesn't have any partitions yet, create one to install Windows on it.
          • Select the hard drive from the list of hard drives.
          • Click Drive options (advanced).
          • Select New from Drive options.
          • Select the size, and click OK.
      13. Image titled Install Windows 7 (Beginners) Step 13
        13
        Install Windows on your preferred hard drive and partition. Once you've decided on where to install Windows, select it and click Next. Windows will begin installing.

      Upgrade

      An Upgrade installation upgrades an older version of Windows on your computer (E.G. Windows Vista) to Windows 7.
      1. Image titled Install Windows 7 (Beginners) Step 43
        1
        Check to see if your computer is compatible with Windows 7. The Windows 7 Upgrade Advisor scans your computer to see if you can upgrade it to Windows 7. Download it here.
      2. Image titled Install Windows 7 (Beginners) Step 44
        2
        Prepare your computer to install Windows.
        • Scan your computer for malware. Malware can prevent Windows from installing correctly.
        • Disable or uninstall any antivirus software because they may interfere with the Windows installation.
        • Uninstall some unnecessary programs to speed up the upgrade. You can install them after Windows 7 has finished.
        • Update Windows with Windows Update.
        • Delete some unnecessary files to speed up the upgrade.
        • Back up your hard drive in case the installation fails and you lose your files. (optional).
      3. Image titled Install Windows 7 (Beginners) Step 45
        3
        Make sure the drive that Windows Setup was extracted onto is plugged into your computer.
      4. Image titled Install Windows 7 (Beginners) Step 46
        4
        Start Windows Setup. Click Start →Computer, double click the USB drive that Windows 7 Setup was extracted to, and double-click setup.exe on the disc. Allow Setup to start.
      5. Image titled Install Windows 7 (Beginners) Step 47
        5
        Click Install Now.
      6. Image titled Install Windows 7 (Beginners) Step 48
        6
        Decide whether to install updates for Windows Setup. The updates are intended to fix known problems with Windows Setup and installing updates makes your installation smoother and more stable. To get updates, click Go Online to get the latest updates for installation (recommended). To skip updates, click Do not get the latest updates for installation.
      7. Image titled Install Windows 7 (Beginners) Step 49
        7
        Accept the License Terms. Read over the Microsoft Software License Terms, check I accept the license terms, and click Next.
      8. Image titled Install Windows 7 (Beginners) Step 50
        8
        Select the Upgrade installation.

      Part 3
      Post-Installation

      These steps carry off after you have finished installing Windows and your computer has started in Windows 7.
      1. Image titled Install Windows 7 (Beginners) Step 51
        1
        Type your username and computer's name and click Next.
      2. Image titled Install Windows 7 (Beginners) Step 52
        2
        Type your password and click Next. If you don't want a password, leave the text boxes blank and then click Next.
      3. Image titled Install Windows 7 (Beginners) Step 53
        3
        Enter your product key then click Next. Your product key is located on the case of your Windows 7 disc if you purchased the disc. To skip entering your product key, just click Next, but Windows will run on a 30-day trial, and you'll have to enter a key once the 30 day trial time is up.
      4. Image titled Install Windows 7 (Beginners) Step 54
        4
        Choose your Windows Update settings.
        • Use recommended settings automatically sets update and security settings recommended by Microsoft.
        • Install important updates only configures your computer only to install necessary updates.
        • Ask me later disables your security until you have made a decision.
      5. Image titled Install Windows 7 (Beginners) Step 55
        5
        Set your time and time zone.
      6. Image titled Install Windows 7 (Beginners) Step 56
        6
        Set your network type.
        • If the computer is connected to your own personal network, choose Home network.
        • If you are connected to the network at your workplace, choose Work network.
        • If you're connected to a public network from places such as restaurants and shops, choose Public network.
      7. Image titled Install Windows 7 (Beginners) Step 57
        7
        Your computer is now set up!
      8. Image titled Install Windows 7 (Beginners) Step 59
        8
        Once your computer is ready, format your USB drive back to its default settings (if you chose the Installing Using a Flash Drive or External Drive method). You can format your USB drive back to its default settings and place your files back onto it by right clicking your USB drive in Start→Computer, clicking Format, clicking Restore Device Defaults in Format, then clicking Start, which permanently deletes any data off of the drive. After the drive has formatted, you can move your files back onto it.
      9. Image titled Install Windows 7 (Beginners) Step 58
        9
        Be sure to reinstall any software you uninstalled, install any device drivers, and re-enable your security software. Also, to improve your security, run Windows Update to install the latest security updates.

      Community Q&A

      • What can I do if it did not finish installing?
        Anonymous
        Run an analysis test on on your computer. It may be a hard drive error or the program may simply not be compatible with your computer build.
        Not Helpful 0 Helpful 0
      • How do I install Windows 7 from an ISO file onto a laptop?
        Anonymous
        Burn it to a disk or copy it to a USB drive and use the bios to boot into it.
        Not Helpful 1 Helpful 0
      Unanswered Questions
      Show more unanswered questions
      Ask a Question

      Things You'll Need

      Windows 7 System Requirements

      • 1 gigahertz (GHz) or faster 32-bit (x86) or 64-bit (x64) processor
      • 1 gigabyte (GB) RAM (32-bit) or 2 GB RAM (64-bit)
      • 16 GB available hard disk space (32-bit) or 20 GB (64-bit)
      • DirectX 9 graphics device with WDDM 1.0 or higher driver

      Resources Needed

      Disc Installation
      • Windows 7 Setup Disc
      • Disc Drive
      • Compatible Computer
      USB Installation

      Clean Installation
      • USB Drive (4 GB minimum size)
      • Internet Connection (to download the ISO and USB extraction software)
      • A computer to extract the files to the USB drive on.
      • USB ports
      • Compatible Computer
      Upgrade Installation
      • An existing installation of Windows (Windows XP or Vista recommended)
      • USB Drive (4 GB minimum size)
      • Internet Connection (to download the ISO and USB extraction software)
      • A computer to extract the files to the USB drive on.
      • USB ports
      • Compatible Computer

       

       

       

     
 
 
Posted by